Tips For Replacing a Window Handle
The replacement of the handle on your window is an easy project that can be accomplished in the convenience of your own home. Follow these steps to ensure an elegant and smooth finish.
Start by removing the screw covers to expose the screws inside your uPVC window handle. Measure the spindle's length to ensure that you receive the right size replacement.
1. Determine the Spindle Length
It's important that you get the spindle size right when replacing windows handles. This is because it will determine how tight or loose the handle is and whether it locks correctly within the window frame. The spindle is a metallic shaft that connects the handle to the lock inside the frame of the window. The spindle can be either a standard industry 8mm cross-section or the earlier 9mm versions. The current industry standard is 8mm but this was not always the case so when buying a new handle it is essential to verify the dimensions.
The easiest method of measuring the length of the spindle is to take off the handle you have already installed and this can be done by turning it to the open position and unscrewing the two screws (which could be hidden behind plastic caps that will need to be removed) that retain the handle. Once the handle is removed, take a measurement from the base to the end. This will give you the measurement required to purchase a new one.
There are many options to consider when choosing a new window handle, from sleek chrome that can fit into a contemporary home to traditional brass with a burnished finish that looks great in restored Georgian rooms or even the more quaint Tudor cottages with curled monkey tail locks! There are a lot of options, but the most important is to pick a style that matches your home.
Espag handles are generally installed to uPVC windows and are the same size with 43mm centres (2 fixings). Cockspur handles range between 58mm and 62mm however luckily there are replacements available for both sizes. Window handles made of Cadenza are a different size again as they have an angled blade that operates a multi-point locking mechanism inside the window.
Another factor when choosing the best window handle is knowing what hand you require to use, which is defined by the hand you use to open the door. Inline Espag handles can be used for left or right-handed windows. Cranked window handles are hand-operated and are only used on windows that open in only one direction.
2. Take the handle off
If the handle is damaged or worn out the handle of a window that is shattered can be a real pain. The good news is that you can replace a uPVC handle yourself. All you require is the most basic tools and some time to complete the process.
First, you must open the window, and make sure it's not locked. Then, you need to remove the screw caps that hold the handle in place. Once the screw caps have been removed, you will be able to remove the handle.
The handle is connected to a spindle within the window frame. The handle is fixed by screws or pins dependent on the kind of handle. The most commonly used handles are the inline Espagnolette and the cockspur handles. Both these types of handles are used on casement windows, as well as aluminium windows. The handles can be locked with a key to stop unauthorised access from the outside. You can also lock the handles by turning them clockwise.
To take the handle off, you'll need a screwdriver with a flat blade to release the clip holding the handle. When this clip is released the handle will slide off the spindle. After the handle has been removed, you will have to determine the length of the spindle and ensure that your new handle is compatible with the spindle's length.
Once you have decided on the proper size of the handle, screw it in place. It is essential to ensure that the handle is properly attached and that it rotates in the correct direction (clockwise in the case of an open or counterclockwise if the handle closes). It is important to ensure that the handle has not been installed upside down.
Replace the screw caps. After you've completed this step, you should test your handle to make sure it is working correctly. It is also recommended to test the locking mechanism by moving the handle to the locked position, and then back again.
3. Take off repairmywindowsanddoors.co.uk is a crucial component of any house and is the first thing that shows signs of wear or damage. This can be caused by natural elements or by regular use, or malicious damage caused by opportunistic criminals who might wish to open a locked window to gain access to your home. However, a simple replacement can easily solve the problem and stop the issue from happening again.
UPVC handles can also be difficult to remove when the locking mechanisms are not functioning properly. Most of the time, the issue can be solved by replacing the multipoint lock rather than the entire handle. It's definitely worth a look as it can save you money.
Once you've removed the old handle, you'll have to remove the screws that were that held it in place. They're usually on the inside face of the handle base. It may be necessary to use a screwdriver to accomplish this. Be cautious not to over tighten the handle since this could cause it to become loose.
Then you will need to find the screws or pins that hold the handle in place. These are usually located on the inside of the handle base. You'll require a screwdriver to take them off. If you want to replace them, you can do so by replacing the screw caps and test the handle to make sure it works correctly.
Install the handle by adjusting the spindle with the window's cutout mechanism. Then screw it into. Make sure that the handle is in the open position and that any screws are secured before replacing the screw covers if you wished to do so. It's done! You can enjoy your newly installed window handle. I hope this will enable you save money on replacement of your door and window in the future. Contact us if need more information on this or any aspect of your uPVC window.
4. Install the new handle
The replacement of a damaged window handle or updating it is easy and can be completed within only a few simple steps. The first step is to determine the type of handle, measure its spindle and know what tools you'll need to complete the job. Safety is always the top priority when working with tools and windows. It's also important to take your time and follow the steps carefully to ensure you have a working handle that is safe to use.
To begin, locate the screws that hold your window handle in place. Remove them while firmly gripping the handle to stop it from falling and causing an injury. After the screws have been removed, you can put them in a safe location to be replaced later.
After the handle that was used previously has been removed, you can begin to install your new one. It is crucial that the handle fits perfectly so that it functions correctly and locks the window in position. Then, slide the metal bar that is square on the handle into the window mechanism hole.
Once the new handle is in place, the final step is to replace the screw caps and test it to make sure it functions. If you're not happy with the result or if the window does not open and close as it should the next step is to contact our experts who can help.
Most UK homes are equipped with uPVC Windows. Therefore, a large number of windows will need to be changed at some point due to wear and tear or breakage. Anyone with a little DIY expertise can complete the task. The most important factor in the success of the process is ensuring that you're using a replacement handle that is compatible with your window's dimensions and style. If you're unsure about what kind of handle you'll require, don't hesitate to reach out to our team, who will be able to help you navigate the various possibilities available.